Access Reflectors on Brandmeister

 


 

The way to use the reflector is to program your radio with Talk Group 9 in Time Slot 2.
(Add 9 in contact as GROUP CALL.   Make a Channel up for TG9.   Add to Zone)
This is the only Talk group you will need for a QSO on the reflector.

To link and unlink the reflector.


Do a Manual Dial -
Go to Menu - Contact - Manual Dial - enter reflector number 4xxx - transmit for 1 second.
The repeater should respond with a voice announcement, "Connect to reflector 4xxx".
Then go back to Talk Group 9 to make a QSO.

or

Program the radio with the Reflector number as a PRIVATE call in contacts.

To link to a reflector.
Select the reflector number from the contacts list and transmit for about 1 second.
The repeater should respond with a voice announcement, "Connect to reflector 4xxx".
Then go back to Talk Group 9 to make a QSO.

To unlink select *4000 from the contacts list, transmit for about 1 second, and you should hear a voice announcement "Reflector Disconnected".

To enquire about the reflector link status call 5000, and the repeater will respond with the currently linked reflector.

To echo test via 9990 on TS-1 or TS-2. (Private Call)

4400 - UK Call
4401 - Chat 1
4402 - Chat 2
4403 - Chat 3
4404 - Ireland
4405 - Scotland   
4407 - Wales
4410 - S.West
4411 - S.East
4412 - North West
4414 - Ireland Chat
4415 - Scotland Chat
4416 - North East
4417 - Wales Chat
4418 - W.Midlands
4419 - E.Midlands 
4420 - Wires X Room 27753
4426 - Allstar Link
4429 - TEST

*4000 - Disconnect Ref ( Add to contact as Private Call when using Repeaters)
                                    ( Add to contact as Group call when using Hotspot)

Link to Current Brandmeister Reflector List